The latest reasons for weak current, security, and monitoring fiber optic cable line faults

We all know weak electricity, security, monitoring, Such projects are very complicated, so it is inevitable that errors will occur in the complex, so we should predict as much as possible to avoid it. However, it is relatively easy to minimize the failures and mistakes of the integrated wiring project. Below we have a comprehensive understanding of the latest reasons for weak, security, and monitoring Fiber Optic Cable line faults.

First: the impact of lightning

The armor components of the fiber optic cable are all metal conductors. If the power line is short-circuited or the lightning strikes the metal parts, a strong current will be generated to damage the cable line equipment. In serious cases, there may even be casualties.

Second: the insulation of the Optical Cable line is not good

If the communication optical cable line is not insulated, the operation strength of the optical cable will be greatly reduced due to stress corrosion and static fatigue after the water in the joint box or in the case of moisture, and the cable may be broken in severe cases. .

Third: the impact of external forces

Line failures are often caused by external forces. Since many communication optical cable lines are laid in the field, the general embedding standards are deep below the stratum, so it is impossible to effectively avoid the damage of many external factors to the optical cable lines.

Fourth: fault at the line joint

The fault is most likely to occur in the line joint. This is because the fiber at the joint has no protection to the original cable structure or the protection has been significantly weakened. Therefore, the daily operation protection can only rely on the joint box. The probability of causing a failure is greatly increased.

The above is the latest reason for the failure of the fiber optic cable line for everyone. We must pay more attention to the weak power, security, and monitoring of fiber optic cable line faults. Finite has been focusing on the R&D and sales of fiber optic products for 12 years. If you have doubts about optical communication and high-quality optical fiber products, you can consider the brand of Fenite fiber, Finite fiber products. Production.