Talking about the fiber optic monitoring installation tutorial

August 07, 2023

[ Huaqiang Security Network News ]

This article takes the placement of the camera as an example to explain the installation tutorial of fiber optic monitoring. The monitoring is generally divided into analog camera and webcam. The webcam is relatively simple to install. After the webcam is fixed, the network cable is connected to the router, and the router must be able to access the external network. Use a computer for monitoring. According to the instructions given by the manufacturer, it will be fine. This is generally used in homes or small supermarkets.

The analog camera is much more troublesome and costs more. Generally used in large factories.

Fiber Monitoring Installation Tutorial

Before you position your camera, you first need to decide where your camera is placed and at which point it is fixed. What to shoot.

The fixed position of the camera is very important, and what kind of camera you are going to purchase, the parameters of the camera are mainly the effective distance.

Ordinary is generally about 600 yuan, night vision is more than 900 yuan.

Second, the requirements of the monitoring host are generally not high. Ben 4 2.8G or more can be, of course, now the general machine configuration can be achieved. But considering the problem of monitoring the 24-hour boot, the chassis must be large, the host power must be strong, and ventilation.

The three monitored hard drives must be large, at least 1TB. The size of the video depends on the clarity of your camera. The monitoring software is operated according to the instructions, and the manufacturer can also help you set it up. The quality of the hard disk is good, you can buy the hard disk of the server. Otherwise, the data loss of the hard disk will cause unnecessary trouble.

Of course, there are also monitoring hosts that do not require you to configure. Direct hardware and software will help you set up ready-made, as shown. This type of host does not have a keyboard, only one mouse and buttons on the mainframe. The operation is relatively simple.

The five own monitoring host needs to purchase a video capture card. The number of capture cards depends on the number of your camera. The video capture card is installed in the PCI slot and must be installed with a driver.

Six monitoring wiring is also very important, the purchase of cables must be good, usually coaxial cable. Now the brand is more complicated, and how to route when wiring should be considered clearly, and long-term use should be considered. And windproof, waterproof, anti-electromagnetic interference.

In addition, if you do large-scale monitoring, manufacturers must choose. Long-term cooperation is the most important. After the completion of the road map must be saved. This takes into account a post-maintenance issue.

Author:

Ms. Megan Liu

E-mail:

megan@fibercan.com.cn

Phone/WhatsApp:

8615889344594