Analyze the four major causes of failure of communication fiber optic cable lines

As we all know, the integrated wiring project is a relatively complicated project, so it is impossible to guarantee zero failure and zero failure in the construction of the project. However, it is relatively easy to minimize the failures and errors of the integrated wiring project. Today, here are four reasons for the failure of the communication Fiber Optic Cable line.

First: the impact of lightning

The armor components of the fiber optic cable are all metal conductors. If the power line is short-circuited or the lightning strikes the metal parts, a strong current will be generated to damage the cable line equipment. In serious cases, there will be casualties.

Second: the insulation of the Optical Cable line is not good

If the communication optical cable line does not do the insulation work, the operation strength of the optical cable will be greatly reduced due to stress corrosion and static fatigue after the water in the joint box or in the case of moisture, and the cable breakage may occur in severe cases. .

Third: the impact of external forces

Line failures are often caused by external forces. Since many communication optical cable lines are laid in the field, the general embedding standards are deep below the stratum, so it is impossible to effectively avoid the damage of many external factors to the optical cable lines.

Fourth: fault at the line joint

The fault is most likely to occur in the line joint. This is because the fiber at the joint has no protection to the original cable structure or the protection has been significantly weakened. Therefore, the daily operation protection can only be carried out by the joint box. The probability of causing a failure is greatly increased.